The FlexMax is the perfect extension to your welding arm to cover large working areas with a low ceiling.
FlexMax™ is an extension crane that is connected to an EconomyArm or KUA extraction arm. Combined with an extraction arm, it has a radius of about 8.5 meters. FlexMax™ is the perfect extension to your welding arm to cover large working areas with a low ceiling. It is unmatched in its ability to reach high positions and locations far from the arm’s mounting position. Very handy when it comes to reaching into and under workpieces, or when you need to mount the arm at a lower height.
The crane consists of a frame with a metal tube with a maximum length of 4.5 m. The wall hinge provides utmost flexibility. The crane is provided with hooks for the suspension of e.g. a wire feeder, cables and tools.
The FlexMax extension crane can be attached to the following extraction arms:
Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.
Below you will find various installations of this product at our customers.
While planning and designing of their new facility, the air quality system had to be configured for 27 welding stations, a 100’ long plasma cutting table, and multiple sources for grinding and torch cutting.
PB MeTech GmbH, situated in Germany. They were looking for a system that could capture and remove welding fumes and floating pieces of metal effectively from their manufacturing facility.
NEUERO had old extraction systems in use. A filtration of the hall air did not take place at this time, since the welding smoke was emitted by fans to the outside over the roof.
Welding fumes accumulated into the workshop and generated a ‘blue layer’ inside the building. In order to remove this vast amount of welding fumes Mimault needed a professional extraction and filtration system.
Before the new facility was built; Montgomery County’s public mass transit and county Department of Transportation fleet equipment was maintained in an out-of-date, cramped facility.
Take a look at these options!
The KUA is an aluminium tube extraction arm ideal for small and medium sized workplaces. It is specially designed to extract fume, gases and oil mist contaminants.
The UltraFlex is a flexible extraction arm and is designed for intensive usage (frequent repositioning) and for applications that generate oily welding fumes.
The LM-2 Junior Arm is a compact and handy hose tube telescopic extraction arm designed specifically for schools, small working booths and areas with a low ceiling.
The EconomyArm is a hose tube extraction arm with all support mechanisms inside the arm itself.
The KUA ATEX is an aluminium tube extraction arm ideal for medium and large sized workplaces. It is designed for usage in explosive environments / ATEX applications.
The MiniMan is a metal tube extraction arm and is recommended for spot welding, laboratory applications and mist collection.
The SUS extraction hose is a strong flexible hose used to extract welding fumes. It designed to reach confined spaces unreachable for extraction arms.
The MiniMan ATEX is an aluminium tube extraction arm and is recommended for fume extraction in explosive environments.
The Flex is a plastic, flexible extraction arm for all kinds of dry welding activities, like MIG/MAG, TIG, stick, electrode and spot welding.