Skip to main content
EH - Highly crush resistant hose - For exhaust extraction - Plymovent
eh-highly-crush-resistant-hose-for-exhaust-extraction-close-up
eh-highly-crush-resistant-hose-for-exhaust-extraction-close-up-cutout
EH - Highly crush resistant hose - For exhaust extraction - Plymovent
eh-highly-crush-resistant-hose-for-exhaust-extraction-close-up
eh-highly-crush-resistant-hose-for-exhaust-extraction-close-up-cutout
Hoses

Highly Crush Resistant Hose (EH)

The EH hose is a crush-proof hose and can withstand temperatures up to 390ºF (200ºC). -Not available in North America-

Features
  • Resistant to all chemicals present in exhaust fumes
  • Flexible and easy to use

The EH is a high-quality crush resistant hose

The EH is a high-quality hardened hose designed for exhaust gas temperatures up to 392ºF (200ºC)*.

Recommended for

  • areas where vehicles might drive over the hose.
  • fire and emergency service stations
  • military facilities  

Features

  • Resistant to all chemicals present in exhaust fumes
  • Highly flexible and compressible
  • Vibration resistant
  • Crush resistant
  • Protected, flow-optimizing exterior folds

This hose needs a partner in crime!

The highly crush resistant hose (EH) exhaust hose can be attached to a combination of the following products:

Rail systems:

Hose reels:

Booms / hose drops:

Nozzles***: 

* When correctly applied with exhaust gas funnels and sufficient fresh air supply (approx. 50%)

** Please note that you can only use the EH hose in combination with a SER if the operating temperature does not exceed 176 ºF (80 ºC).

*** Please make sure that your nozzle and hose temperature properties match

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

Physical dimensions and properties

Material
hose wall
EPDM/PP coated fabric
clamp supporting spiral
special plastic-profile
Colour
yellow/black
Thickness
0,4 mm (0.02 in.) approx.

Ambient conditions

Operating temperature
up to 200ºC (392ºF), when correctly applied with exhaust gas funnels and sufficient fresh air supply (approx. 50%)

Options and accessories

Safety Disconnect Handle, balancer, hose saddle, hose clamps
(must be ordered separately)

Order information

Article no.
see product data sheet
Number/package
1

Shipping data

Gross weight
see product data sheet
Harmonized Tariff Code
39173900
Country of origin
Germany
en

EH Hose Product Data Sheet (EN)

Product data sheet

Doesn't fit your needs?

Take a look at these options!

Fabric Composite Hose (EF)

Hoses

The Fabric composite hose (EF) hose has a very good heat resistance that can withstand temperatures up to 300ºC (572ºF). -Not available in North America-

Silicone/Nomex® Fiberglass Hose (SNF2)

Hoses

The SNF2 hose is a lightweight, high-temperature, double ply exhaust hose that is ideally suited for Plymovent hose reels and fixed extractor units, and can endure exhaust gas temperatures of up to 550°F (288°C) continuous. -Available only in North America-

Fabric Composite Hose (ET)

Hoses

High-quality fabric composite hose designed for exhaust gas temperature up to 600ºC (1112ºF). It is resistant to all chemicals present in exhaust fumes. -Not available in North America-

Standard Temperature Hose (ST)

Hoses

The ST hose for fire and emergency service stations can endure exhaust gas temperatures of up to 400˚F (204°C) continuous in a properly designed system. -Available only in North America-

Flame retardant and vibration resistant hose (EG2)

Hoses

The flame retardant and vibration resistant hose (EG2) can withstand exhaust gas temperatures up to 350°F (177°C). -Available only in North America-

Synthetic composite fabric hose (EF2)

Hoses

The EF2 hose is made up of a synthetic composite fabric that can endure exhaust gas temperatures of up to 570°F 300°C) continuous. -Available only in North America-

Vibration Resistant Hose (EG)

Hoses

The EG hose is vibration resistant and can withstand temperatures up to 390ºF (200ºC). Recommended for use in areas with service cars and light trucks. -Not available in North America-

High Temperature Hose (HT)

Hoses

The High Temperature Hose (HT) hose for fire and emergency service stations can endure exhaust gas temperatures of up to 900˚F (482°C) continuous in a properly designed system. -Available only in North America-

We're happy to help!

Contact our specialists now and get answers on all your questions regarding clean air.

Sign up to newsletter

Stay up to date

Contact form

Reach out to us

Nearest locations

Find out where we are