Update history
ControlPro/Panel
[Version 3.8.3]
- USB functionalities now work on the USB port of the ControlPro/HMI instead of the internal USB port inside the ControlPro/Panel:
- Backup and restore settings
- Export overall event log
- Import language files
- Updated HTML interface for proper operation in Chrome version 80 and higher
- Improved warnings
- W106 - Compressed air valve fault; gives more info on measure valve current delta in mA
- W105 - Compressed air (cleaning active); is now delayed by the "compressed air alert delay" setting in screen (1.5 Alerts).
- Improved overall event logging
- Included settings and other system data
- Improved filtering (interval times and thresholds)
- Rounding values and added the unit of measure
- Several small bug fixes
[Version 3.6.1]
- Added lock mode for homescreen function, see “5.7 Lock mode”.
- Complete new function to create an extra password protection on the controlling functions of the home screen (start/stop fan, extra timer settings, STOP, manual cleaning).
- Changed possible events for output relays.
- None
- Start/stop fan
- Cleaning active
- System mode – Automatic
- Warning active
- Alarm active
- Sliding valve output
- Warning/alarm (no compressed air)
- Warning (dustbin)
- Make several trigger adjustable under “1.5 Alerts”.
- Added “external fault - trigger”, options: HIGH or LOW.
- Added “fan alarm - trigger”, options: HIGH, LOW or FAN-MONITORING.
- Added extra options under “2.3 External start/stop signal”.
- Pulse on/off (same as start/stop button; pulse changes the status of the fan).
- Pulse timer on (pulse starts the fan when it was off and triggers an extra timer which can be set from 15 min till 8 hours).
- Make Ethernet setting configurable under “5.6.1 Configure Ethernet”.
- Automatic DHCP.
- Static IP (IP Address, Subnet mask, Default gateway, Broadcast address, DNS).
- Extra info in “operational info” screen
- Added actual value fan frequency (Hz) under “2.2.1 PID setpoint of pressure”.
- Also in same screen at the end of the wizard
- Added option to connect OilShield under “1.1 Fire safety system”.
- Also added new warning: W118 OilShield
- Several small bug fixes