MRP | Mini Rail Profile | Plymovent

The preferred rail system for fire, EMS and vehicle repair

MRP | Mini Rail Profile | Plymovent
MRP | Mini Rail Profile | Plymovent
MRP | Mini Rail Profile | Plymovent
MRP | Mini Rail Profile | Plymovent
Highlights

The Mini Rail Profile (MRP) system is an exhaust extraction system for emergency service stations and other facilities with confined spaces and/or low ceilings.

Video
Get a quote
Description

The Mini Rail Profile Fire (MRP-Fire) system is designed for fire and emergency systems to connect to a vehicles tailpipe to capture and remove virtually 100% of exhaust emissions. MRP is fully automatic, from the fan activation to the automatic nozzle release from the exiting vehicle. It is easy in use with only a one-step connection to the system as the vehicle enters the facility. The MRP is fully automatic, can accommodate up to two vehicles in tandem but can be engineered to accommodate more if need be. MRP features a square rail profile and an internal crab trolley that runs inside the rail. This system will only be available utilizing our Magnetic Grabber nozzle*.
 

How The Mini Rail Profile (MRP) system works

The Mini Rail Profile Fire (MRP-F) is an automatic, magnetic exhaust gas extraction system designed for the exhaust extraction of fire and rescue vehicles with low level, undercarriage exhaust tailpipes. The system is used to remove harmful vehicle exhaust emissions from the facility by capturing and removing the exhaust at the emission source, the tailpipe.

As the vehicle exits the facility, the trolley moves along to the end of the rail. The balancer locking cable secures that the Magnetic Grabber is disconnected from the tailpipe outside the building.

 

Where is the MRP used

The rail is installed overhead along the service bays next to the fire apparatus and is connected to an exhaust fan. The internal crab is equipped with the proven concept of lower, -mid and upper hose combined with the Magnetic Grabber and can be positioned at any service bay where extraction is needed.

 

Optimal and efficient extraction

The MRP can accommodate up to two vehicles in tandem but can be engineered to accommodate more if need be, thereby providing optimal extraction efficiency and an energy efficient system. Exhaust emissions are vented to the outside through the rail system, typically through a single outlet.

 

*The MRP system can use our Magnetic Grabber® nozzle for the fire industry or a vise grip nozzle for a slow-moving vehicle in a maintenance shop.

Features
  • Perfect for smaller apparatus bays
  • Provides an economic solution for long back-in bays
  • Energy efficient system
  • Easy to use
  • Captures virtually 100% of exhaust emissions
  • Fully automatic
  • Standard design accommodates up to 2 vehicles in tandem
Recommended for

VEX

  • Military facilities
  • Automobile plants
  • Department of Transportation facilities
  • Motorcycle/ATV garages
  • Fleet service & repair bays
  • Agricultural equipment facilities
  • Bus depots

 

Fire & EMS

  • Fire stations
  • EMS stations
  • ARFF stations
  • Municipal fire stations
  • Military fire stations
91085