Skip to main content
DraftMax Plasma Cutting Grid - Downdraft Table - Plymovent
Draftmax HEPA Plasma Cutting Grid - Downdraft Table - Plymovent
DraftMax Plasma Cutting Grid - Downdraft Table - Plymovent
Draftmax HEPA Plasma Cutting Grid - Downdraft Table - Plymovent
Downdraft table

DraftMax for plasma cutting

The DraftMax for plasma cutting is a work bench fitted with a disposable- or self-cleaning filter. The effective cleaning system ensures constant and high filter efficiency. This unit is recommended for occasional to daily usage.

Features
  • Integrated filter
  • Self-cleaning or disposable filter depending on your choice
  • Maintenance-friendly

The DraftMax for plasma cutting is a downdraft table with an automatic self-cleaning fliter.

Recommended for

  • Occasional to daily plasma cutting
  • Professional workshops
  • Light welding and grinding activities

DraftMax Ultra

The DraftMax Ultra is a workbench that provides extraction and filtration for welding and grinding applications. The DraftMax Ultra features a work grid, a three-stage pre filtration system for optimum spark arresting and two self-cleaning main filter cartridges. Both pre and main filters have dust drawers underneath. The filter cleaning system starts automatically when the pressure drop reaches a certain maximum value during use (online cleaning). (online cleaning). The filter cartridges are individually cleaned from the inside by compressed airshots. An integrated buzzer indicates when the filter cartridges need to be replaced.

DraftMax Basic

The DraftMax Basic is a workbench that provides extraction and filtration for welding and grinding applications. The DraftMax Basic features a work grid, a three-stage pre filtration system for optimum spark arresting and two disposable main filter cartridges. Both pre and main filters have dust drawers underneath. A Magnehelic gauge on the control panel indicates when the filter cartridges require replacement. The working height of the downdraft table is adjustable. Filter exchange and service can be effected from the front side.

Plasma cutting work grid

Specially constructed work grid, which is compulsory for plasma cutting applications (current max. 50 A). The plasma cutting work grid consists of two frames with 13 bars each and two additional spark arresters to be mounted over the existing ones in the downdraft table. The additional spark arresters protect the existing spark arresters against melting steel from the plasma cutting process. The bars can be replaced individually.

Maintenance-friendly

Maintenance can be carried out from the front of the downdraft table. This makes it easy to replace filters and to empty the dust trays. Filtration takes place through two oval filter cartridges with a total filter surface of 52 m2 (560 ft2). The filter cartridges cover a large filter surface, resulting in a long filter lifespan. This means even less maintenance and reduces all-over operational costs.

Safety

The integrated spark arrester prevents sparks from reaching the filter cartridges. The spark arrester is placed underneath the working surface of the downdraft table to ensure a safe workplace.

HEPA Kit

The HEPA kit consists of a filter housing with a HEPA filter to be mounted on the outlet of the downdraft table. It concerns a final filter, especially suitable for chrom VI welding processes. It is supplied with two adjusting feet. The HEPA filter makes this product in compliance with the W-3 certification.

Step up your plasma cutting game with one of these options

  • DraftMax Basic for plasma cutting
    Filter replacement by hand, Suitable for occasional usage (few hours per week), light to moderate plasma cutting at schools or small workshops. Also usable for light for welding and grinding activities.
     
  • DraftMax Basic HEPA for plasma cutting
    W-3 compliant ✔, Filter replacement by hand, Suitable for occasional usage (few hours per week), light to moderate plasma cutting at schools or small workshops. Also usable for light for welding and grinding activities.
     
  • DraftMax Ultra for plasma cutting
    Automatic self-cleaning filter, Suitable for daily, heavy duty plasma cutting at professional workshops. Also usable for light for welding and grinding activities.
     
  • DraftMax Ultra HEPA for plasma cutting
    W-3 compliant ✔, automatic self-cleaning filter, Suitable for daily, heavy duty plasma cutting at professional workshops. Also usable for light for welding and grinding activities.

Doesn't fit your needs? Take a look at these options!

promotionbanner-filterblogs-applicationpages.png

 

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

Physical dimensions and properties

Dimensions (L x W x H)
1380 x 1005 x 920 mm (54.3 x 39.4 x 36.2 in.)
Dimensions work grid (L x W)
1366 x 750 mm (53.8 x 29.5 in.)
Height adjustment
920 - 970 mm (36 - 38 in.)
Material:
Housing
Epoxy-coated sheet metal
Work grid
Galvanized steel
Colour:
Housing
Black RAL 9005
Front doors
Yellow RAL 1004
Weight (net)
245 kg (540 lbs)
Mains cord
3m (1m internal, 2m external)
Plug
Not included
Motor design
IEC B3
Maximum load:
Without wheelset
200 kg (440 lbs)
With wheelset
150 kg (330 lbs)

Filters

Material main filter cartridges
Cellulose and polyester fibres
Shape
Oval
Number of pleats
300
Filter surface area
2 x 26 m2 (2 x 280 ft2)
Height of pleats
75 mm (2.95 in.)
Distance between pleats
4 mm (0.16 in.)
Surface weight
90 g/m2 (129 grains/ft2)
Efficiency
>99,9%
Filter class
M according to DIN EN 60335-2-69. At particle size 0,3-5 μm. At filtration speed 0,056 m/s (11 ft/min.)
Treatment
SurfacePlus precoat (synthetic amorphous silica) (4,6 g/m2)

Performance

Fan type
Radial
Air volume:
50Hz
2500 m3/h (1,500 CFM)
60Hz
3000 m3/h (1,750 CFM)
Noise level (according to ISO 3746):
without options (50Hz)
74 dB(A)
without options (60Hz)
78 dB(A)
with silencer (50Hz)
69 dB(A)
with silencer (60Hz)
74 dB(A)
with silencer + HEPA kit (50Hz)
67 dB(A)
with silencer + HEPA kit (60Hz)
71 dB(A)

Electrical data

Power consumption:
50Hz
2,2 kW (3 HP)
60Hz
3,0 kW (4 HP)
Connection voltage
400V/3~/50Hz
480V/3~/60Hz
600V/3~/60Hz
Protection class
IP 66 (electronics only)
Nominal current
4,4 A
Fuse:
Transformer
T1Amp CCMR1
24V system
T2Amp
Mains cord
3~/4-cored (3 phases, 1 earth)

Ambient conditions

Operating temperature:
min.
5°C (41°F)
nom.
20°C (68°F)
max.
40°C (104°F)
Max. relative humidity
80%
Outdoor use allowed
no
Storage conditions
5-40°C (41-104°F), relative humidity max. 80%

Available options/accessories

Backdraft kit
Required for all welding applications and grinding
Side panels
HEPA kit
Recommended for stainless steel welding in case of recirculation
Silencer/Outlet duct
Recommended option
Working light
Bench vice mounting bracket
Wheelset
Dust tray lid
Recommended for stainless steel welding
FCC-36/PTFE (2 x 18 m²)
Filter cartridges of BiCo spunbond polyester + PTFE membrane; particularly suitable for heavy duty applications

Scope of supply

Downdraft table without grid - Work grid (two-piece) - Cover strip with 8 bolts M6 - Square key 8 mm - Square key 6 mm

Order information

Article number:
400V/3~/50Hz
7244700000
480V/3~/60Hz
7245200000
600V/3~/60Hz
7245800000
Number/package
1

Shipping information

Gross weight (incl. pallet)
260 kg (573 lbs)
Packing dimensions
1505 x 1020 x 1150 mm (59.3 x 40.2 x 45.3 in.)
Max. number/pallet
1 (stack: max. 2 pallets)
Harmonized Tariff Code
8421.39.2090

Features

Maintenance performed from the front
Three-stage spark arresting:
1st:
Spark arresters below work grid
2nd:
Labyrinth spark trap
3rd:
Spark arresters in main filter housing
Maximum filter surface area
Simple control
en

DraftMax Brochure EN

Brochure
en

DraftMax Basic Product Data Sheet EN

Product data sheet
en

DraftMax Ultra Product Data Sheet EN

Product data sheet
en

DraftMax Plasma cutting grid Product Data Sheet EN

Product data sheet
en

DraftMax HEPA Kit Product Data Sheet EN

Product data sheet
en

DraftMax Basic/Ultra Manual EN

Manual
en

DraftMax Basic & Ultra CE declaration EN

Certificate
en

DraftMax + HEPA CE declaration EN

Certificate
ce-mark-yellow.png

The DraftMax for plasma cutting is in accordance with the following directives:

  • Machine Directive 2006/42 EC
  • EMC 2014/30 EU
  • LVD 2014/35 EU
  • ErP Directive 2009/125 EC
  • EN-ISO 21904-2:2020 (W3)

Which DraftMax is right for you?

Your solutions for plasma cutting applications

Filter
Height adjustment
Weight (net)
Filter surface area
Dimensions (L x W x H)
DraftMax Plasma Cutting Grid - Downdraft Table - Plymovent

DraftMax Basic for plasma cutting

Filter

Disposable filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

293 kg (645 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm

Draftmax HEPA Plasma Cutting Grid - Downdraft Table - Plymovent

DraftMax Basic HEPA for plasma cutting

Filter

Disposable filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

326 kg (718 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2) + 34 m2 (366 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm

DraftMax Plasma Cutting Grid - Downdraft Table - Plymovent

DraftMax Ultra for plasma cutting

Filter

Automatic self-cleaning filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

303 kg (668 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm

Draftmax HEPA Plasma Cutting Grid - Downdraft Table - Plymovent

DraftMax Ultra HEPA for plasma cutting

Filter

Automatic self-cleaning filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

336 kg (740 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2) + 34 m2 (366 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm

Doesn't fit your needs?

Take a look at these options!

DraftMax Eco

Downdraft table

The DraftMax Eco is a downdraft work bench with an integrated spark arrester, but contains no filter cartridges. It is suitable for light to heavy welding, grinding and cutting applications depending on the filter.

DraftMax for light applications

Downdraft table

The DraftMax for light applications is a work bench fitted with a disposable filter. Recommended for light activities like grinding, cutting and TIG-welding. For small workshops or welding schools.

DraftMax for heavy-duty applications

Downdraft table

The DraftMax for heavy-duty applications is a downdraft table fitted with a disposable or self-cleaning filter. This unit is recommended for daily, intensive usage for professionals

We're happy to help!

Contact our specialists now and get answers on all your questions regarding clean air.

Sign up to newsletter

Stay up to date

Nearest locations

Find out where we are