Skip to main content
Downdraft table

DraftMax for heavy-duty applications

The DraftMax for heavy-duty applications is a downdraft table fitted with a disposable or self-cleaning filter. This unit is recommended for daily, intensive usage for professionals

Features
  • Integrated filter
  • Self-cleaning or disposable filter depending on your choice
  • Maintenance-friendly

The DraftMax for heavy-duty applications is a backdraft and downdraft table for intensive usage

Recommended for

  • Occasional to daily heavy-duty usage
  • Professional welders
  • Stainless steel welding with HEPA filter

DraftMax Ultra

The DraftMax Ultra is a workbench that provides extraction and filtration for welding and grinding applications. The DraftMax Ultra features a work grid, a three-stage pre-filtration system for optimum spark arresting and two self-cleaning main filter cartridges. Both drawers are underneath. The filter cleaning system starts when the pressure drops and main filters have pull-out dust containers for when they reach a certain maximum value during use (online cleaning). The filter cartridges are individually cleaned from the inside by compressed air. An integrated buzzer indicates when the filter cartridges need to be replaced.

Backdraft kit and Side panels

By the use of a backdraft kit, the downdraft extraction capacity is reduced to approximately 20%. The remaining 80% is extracted through the backdraft panel. It consists of narrowing plates that need to be mounted underneath the work grid and a backdraft panel with vertical lamellas. The backdraft kit is compulsory for all welding applications and recommended for grinding applications. Side panels improve extraction effectiveness by reducing the influences of draught. They also prevent tools, metal and other parts from falling off the downdraft table. The side panels consist of hinged trapezium-shaped sheet metal plates and have to be used in combination with the backdraft kit. They are to be mounted on the sides of the downdraft table.

Safety

The integrated spark arrester prevents sparks from reaching the filter cartridges. The spark arrester is placed underneath the working surface of the downdraft table to ensure a safe workplace.

HEPA Kit

The HEPA kit consists of a filter housing with a HEPA filter to be mounted on the outlet of the downdraft table. It contains a final filter, especially suitable for chrome VI welding processes. It is supplied with two adjusting feet. The HEPA filter makes this product in compliance with the W-3 certification.

Maintenance-friendly

Maintenance can be carried out from the front of the downdraft table. This makes it easy to replace filters and empty dust trays. Filtration takes place through two oval filter cartridges with a total filter surface of 52 m2 (560 ft2). The filter cartridges cover a large filter surface, resulting in a long filter lifespan. This means even less maintenance and reduces all-over operational costs.

Step up your grinding and welding game with one of these options

  • DraftMax Ultra for heavy-duty applications
    Automatic self-cleaning filter, Suitable for daily, heavy-duty welding and grinding applications at professional workshops. Recommended when welding is your main usage. 
     
  • DraftMax Ultra HEPA for heavy-duty applications
    W-3 compliant ✔, For stainless steel welding, Automatic self-cleaning filter, Suitable for daily, heavy-duty welding and grinding applications at professional workshops. Recommended when welding is your main usage. 

Doesn't fit your needs? Take a look at these options!

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

Physical dimensions and properties

Dimensions (L x W x H)
1380 x 1005 x 920 mm (54.3 x 39.4 x 36.2 in.)
Dimensions work grid (L x W)
1366 x 750 mm (53.8 x 29.5 in.)
Height adjustment
920 - 970 mm (36 - 38 in.)
Material:
Housing
Epoxy-coated sheet metal
Work grid
Galvanized steel
Colour:
Housing
Black RAL 9005
Front doors
Yellow RAL 1004
Weight (net)
255 kg (562 lbs)
Mains cord
3m (1m internal, 2m external)
Plug
Not included
Motor design
IEC B3
Maximum load:
Without wheelset
200 kg (440 lbs)
With wheelset
150 kg (330 lbs)

Filters

Material main filter cartridges
Cellulose and polyester fibres
Shape
Oval
Number of pleats
300
Filter surface area
2 x 26 m2 (2 x 280 ft2)
Height of pleats
75 mm (2.95 in.)
Distance between pleats
4 mm (0.16 in.)
Surface weight
90 g/m2 (129 grains/ft2)
Efficiency
>99,9%
Dust class
M according to DIN EN 60335-2-69. At particle size 0,3-5 μm. At filtration speed 0,056 m/s (11 ft/min.)
Treatment
SurfacePlus precoat (synthetic amorphous silica) (4,6 g/m2)
Compressed air connection
3/8” (female)
Compressed air tank
9 litres (2.4 gallon)
Compressed air pressure
5-8 bar (72-115 psi)
Required compressed air quality
Dry and oil-free, according to ISO 8573-3 class 6
Online cleaning
7 times per filter during 2 minutes

Performance

Fan type
Radial
Air volume:
50Hz
2500 m3/h (1,500 CFM)
60Hz
3000 m3/h (1,750 CFM)
Noise level (according to ISO 3746):
without options (50Hz)
74 dB(A)
without options (60Hz)
78 dB(A)
with silencer (50Hz)
69 dB(A)
with silencer (60Hz)
74 dB(A)
with silencer + HEPA kit (50Hz)
67 dB(A)
with silencer + HEPA kit (60Hz)
71 dB(A)

Electrical data

Power consumption:
50Hz
2,2 kW (3 HP)
60Hz
3,0 kW (4 HP)
Connection voltage
400V/3~/50Hz
480V/3~/60Hz
600V/3~/60Hz
Activation of filter cleaning system
Pressure controlled
Start/stops of fan
max. 12 per hour
Protection class
IP 66 (electronics only)
IP 66 (electronics only)
4,4 A
Fuse:
Transformer
T1Amp CCMR1
24V system
T2Amp
Mains cord
3~/4-cored (3 phases, 1 earth)

Ambient conditions

Operating temperature:
min.
5°C (41°F)
nom.
20°C (68°F)
max.
40°C (104°F)
Max. relative humidity
80%
Outdoor use allowed
no
Storage conditions
5-40°C (41-104°F), relative humidity max. 80%

Available options/accessories

Backdraft kit
Required for all welding applications and grinding
Side panels
Plasma cutting work grid
Required for plasma cutting applications (max. 50 A)
HEPA kit
Recommended for stainless steel welding in case of recirculation
Working light
Movement sensor
Automatic start/stop device
Welding cable sensor
Automatic start/stop device (for welding applications only)
Bench vice mounting bracket
Wheelset
Dust tray lid
Recommended for stainless steel welding
FCC-36/PTFE (2 x 18 m²)
Filter cartridges of BiCo spunbond polyester + PTFE membrane; particularly suitable for heavy duty applications

Scope of supply

Downdraft table without grid - Work grid (two-piece) - Cover strip with 8 bolts M6 - Square key 8 mm - Square key 6 mm

Order information

Article number:
400V/3~/50Hz
7244700000
480V/3~/60Hz
7245200000
600V/3~/60Hz
7245800000
Number/package
1

Shipping information

Gross weight (incl. pallet)
270 kg (595 lbs)
Packing dimensions
1505 x 1020 x 1150 mm (59.3 x 40.2 x 45.3 in.)
Max. number/pallet
1 (stack: max. 2 pallets)
Harmonized Tariff Code
8421.39.2090

Features

Maintenance performed from the front
Three-stage spark arresting:
1st:
Spark arresters below work grid
2nd:
Labyrinth spark trap
3rd:
Spark arresters in main filter housing
Maximum filter surface area
Simple control
Efficient filter cleaning
en

DraftMax Brochure EN

Brochure
en

DraftMax Basic Product Data Sheet EN

Product data sheet
en

DraftMax Ultra Product Data Sheet EN

Product data sheet
en

DraftMax HEPA Kit Product Data Sheet EN

Product data sheet
en

Draftmax Backdraft kit Product Data Sheet EN

Product data sheet
en

DraftMax Side panels Product Data Sheet EN

Product data sheet
en

DraftMax Basic/Ultra Manual EN

Manual
en

DraftMax Basic & Ultra CE declaration EN

Certificate
en

DraftMax + HEPA CE declaration EN

Certificate
ce-mark-yellow.png

The DraftMax for heavy-duty applications is in accordance with the following directives:

  • Machine Directive 2006/42 EC
  • EMC 2014/30 EU
  • LVD 2014/35 EU
  • ErP Directive 2009/125 EC
  • EN-ISO 21904-2:2020 (W3)

Which DraftMax is right for you?

Your solutions for heavy applications

Filter
Height adjustment
Weight (net)
Filter surface area
Dimensions (L x W x H)

DraftMax Ultra

Filter

Automatic self-cleaning filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

308 kg (679 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm (52.2 x 6 x 25.6 in.)

DraftMax Ultra HEPA

Filter

Automatic self-cleaning filter

Height adjustment

920 - 970 mm (36 - 38 in.)

Weight (net)

341 kg (751 lbs)

Filter surface area

2 x 26 m2 (2 x 280 ft2) + 34 m2 (366 ft2)

Dimensions (L x W x H)

1326 x 153 x 650 mm (52.2 x 6 x 25.6 in.)

Doesn't fit your needs?

Take a look at these options!

DraftMax Eco

Downdraft table

The DraftMax Eco is a downdraft work bench with an integrated spark arrester, but contains no filter cartridges. It is suitable for light to heavy welding, grinding and cutting applications depending on the filter.

DraftMax for plasma cutting

Downdraft table

The DraftMax for plasma cutting is a work bench fitted with a disposable- or self-cleaning filter. The effective cleaning system ensures constant and high filter efficiency. This unit is recommended for occasional to daily usage.

DraftMax for light applications

Downdraft table

The DraftMax for light applications is a work bench fitted with a disposable filter. Recommended for light activities like grinding, cutting and TIG-welding. For small workshops or welding schools.

We're happy to help!

Contact our specialists now and get answers on all your questions regarding clean air.

Sign up to newsletter

Stay up to date

Nearest locations

Find out where we are