Balancer 450 series | Plymovent

Balancer to lift and hold the extraction hose of the ground

Balancer 450 series | Plymovent
Balancer 450 series | Plymovent
Balancer 450 series | Plymovent

The balancer is designed to keep the exhaust extraction hose clear of the ground, thus minimizing the risk of damage to the hose and surroundings.

Get a quote

The balancer-450 series enables easy operation of the vehicle exhaust system. With the use of a powerful spring the balancer holds and lifts the hose of the system. The balancer is designed to balance a load within 0-4,5 m (0-15 ft.) with a maximum angle of 30° from the plumb line. The balancer is equipped with a spring tension lock which holds the wire in extended position. The locking function can easily be turned on or off depending on area of use.



The BRC-450/13-16-HB is a unique balancer integrated with a hydraulic brake, ensuring a soft close retraction until the balancer is completely retracted. This facilitates a safe retraction of the hose after disconnection without the risk of a hose flying back. The approximate retraction speed is 6 m/min. (20 ft/min) The BRC-450/13-1-HB is ideal in conjunction with the crab return system.

  • Easy to install
  • Adjustable tension
  • Closed housing
  • Controlled retraction (HB only)
  • Handles heavy weight
  • Lock function
  • Wire length 4,5 meters (15 ft.)
  • 13-16 kg lifting capacity
  • Micro switch ready
Recommended for
  • Heavy duty applications
  • Military facilities
  • Drive through vehicle test facilities
  • All Plymovent STR rail systems, CRS, VSRX, booms and drops

This website uses cookies to track your behaviour and to improve your experience on the site.

You can always delete saved cookies by visiting the advanced settings of your browser.

*Privacy Statement